Kendo Nichrome Wire Ni80 (50ft)

The Mesh Company’s Nichrome 80 Resistance wire is amazingly good for rebuilding your atomizer.

It is ideal for sun ohm coil builds. Ni80 (Ni80Cr20) has a lower resistance per length compared to Kanthal (FeCrAl). Consequently it will heat up much faster. It is therefore a perferred alternatively to kanthal for many “cloud chasers”. This wire is also commonly used for Hot Cutting. Melting point oC – 1350 Max continous operating temperature in the air oC – 1200.

36 GA 

Nickel Chrome 80/20 (Ni80) is commonly used as a heat treatment wire.

In modern times it has found popularity n the vaping industry due to its high heat and electrical resistance.

80/20 nickel chronium alloy is often used for wrought and cast parts for high temperature applications, as it has better oxidation and hot corrosion resistance compared to cheaper iron-nickel-chromium alloys. This nickel chromium alloy is highly suited to applications that are subject to oxidation.

• Ni – Rest
• Cr – 20.0 – 23.0
• Fe – <1.0

Max Continous Service Temp Of Element – 1200

Resistivity at 20oc – 1.09

Density (g/cm3) – 8.40

Thermal Conductivity (KJ/m.g.oC) – 60.3

Coefficient of Lines Expansion – 18.0

Melting Point (approx) (oC) – 1400

Elongation at Rupture (%) – >20

Micrographic Structure – Austenite

Magnectic Properties – Nonmagnectic

Techical Specification:

• Diameter – 0.12mm
• Spool Type – Large Plastic Bobbin
• Shape – Round Wire
• Ohms/m – 96.38

38 GA

Nickel Chrome 80/20 (Ni80) is commonly used as a heat treatment wire.

In modern times it has found popularity n the vaping industry due to its high heat and electrical resistance.

80/20 nickel chronium alloy is often used for wrought and cast parts for high temperature applications, as it has better oxidation and hot corrosion resistance compared to cheaper iron-nickel-chromium alloys. This nickel chromium alloy is highly suited to applications that are subject to oxidation.

• Ni – Rest
• Cr – 20.0 – 23.0
• Fe – <1.0

Max Continous Service Temp Of Element – 1200

Resistivity at 20oc – 1.09

Density (g/cm3) – 8.40

Thermal Conductivity (KJ/m.g.oC) – 60.3

Coefficient of Lines Expansion – 18.0

Melting Point (approx) (oC) – 1400

Elongation at Rupture (%) – >20

Micrographic Structure – Austenite

Magnectic Properties – Nonmagnectic

Techical Specification:

• Diameter – 0.1mm
• Spool Type – Large Plastic Bobbin
• Shape – Round Wire
• Ohms/m – 139.87